透明PC塑料胶水，PC塑料粘PC塑料胶水

巨箭PC（聚碳酸酯）单组分胶粘剂 g-933

致力于特殊产品描述g-933 PC JUKAM Jujian胶系统采用专用树脂。PC、PS、HIPS、粘接ABS，PVC，PMMA，GP，作为和其他硬胶粘贴或相互粘连，经室温自然固化，定位时间快，固化后的胶粘剂，完全的不发白、防水、防腐、防锈性能优秀。

Committed to special product description g-933 PC JUKAM Jujian Adhesive system uses special resin. PC, PS, HIPS, bonding ABS, PVC, PMMA, GP, as and other hard glue paste or mutual adhesion, the room temperature natural curing, positioning time fast, curing adhesive, completely not white, waterproof, corrosion , Excellent anti-rust performance.

三，操作说明：**步：表面处理，首先要去除材料表面的油或灰尘。第二步：上胶、上胶应均匀厚度、到位，不留粘合盲区。第三步：胶水快速粘合后立即加压，使两侧紧密贴合！

Third, the operating instructions: The first step: surface treatment, first of all to remove the material surface of the oil or dust. The second step: glue, glue should be uniform thickness, in place, leaving no bonding blind spot. The third step: glue immediately after the rapid bonding pressure, so that both sides close fit

第四步：g-933l胶适用于针筒、粘合透明PC塑料，没有白色雾状，没有痕迹，定位快速（3-6秒定位），30分钟左右具有撕裂材质效果

The fourth step: g-933l glue for syringes, adhesive transparent PC plastic, no white mist, no traces, positioning fast (3-6 seconds positioning), 30 minutes or so with tear material effect

g-933m胶贴合后，约10-15分钟定位，24小时后测试强度

G-933m glue after bonding, about 10-15 minutes positioning, 24 hours after the test strength

g-933h胶贴合后，约30-45分钟定位，24小时完全固化！

G-933h glue after bonding, about 30-45 minutes positioning, 24 hours fully cured!

四、包装

90ml /支，1公斤/桶，4公斤/桶，15公斤/桶，

Four, packaging

90ml / support, 1 kg / barrel, 4 kg / barrel, 15 kg / barrel,

五、贮存和质量

存放在阴凉干燥的地方！远离火。放置在儿童接触不到的地方!在室温下保质期为12个月。

Five, storage and quality

Store in a cool dry place! Away from fire Placed in children not reach the place! At room temperature shelf life of 12 months.